RCT/FCT/Edge Crush Tester Digital

Product Description

The Presto ECT/RCT/FCT is useful for testing Ring Crush Test (RCT) of paper/paperboard ,Flat Crush Test (FCT),  to test horizontal load bearing level of corrugated board ,Pin Adhesion Test (PAT).
To test the bond strength between the liner & fluting ,Edge Crush Test (ECT),  to test the vertical loading capacity of Corrugated Board.

It is manufactured as per TAPPI – T822 / T825 / T821 / T811
ISO 12192 / 3037 / 3035
 

Product Specification

• Load Cell Capacity 100 Kgf
• Display • LED (Digital)
• Accuracy ±2% at full load (with master load)
• Least Count/Resolution 0.01 Kgf
• Power 220V, Single phase, 50 Hz
• Test Speed 12.5± 2.5 mm/min

Highlights :

• Safety Switch Upward & Downward
• Limit Switches
• Material Mild Steel
• Finish Powder coated Havel
• Gray & Blue combination nish and bright chrome /
• zinc plating for corrosion resistant nish
• Dimensions 600x500x86

Product Features

• Microprocessor based display for accurate test results
• Display for compression strength of test specimen
• Separate fixtures for ring crush, edge crush and flat crush test.
• Highly accurate test results under compression force
• Strong gripping clamps.
• Bright LED display
• Inbuilt calibration facility
• Feather touch controls
• RCT/FCT/Edge Crush Tester reveals the crushing resistance in terms of Kg/Unit length.

Optional Features: 

Computerised model also available 
Digital model with printer facility also available.